ADT® Authorized Dealer Serving the entire Phoenix area
close up of a lady adjusting the security panel
March 07, 2022

How To Reset Your Security System In Phoenix

One perk of getting your home security set up by trained experts is that you seldom have to make major adjustments to it. With that being said, there may be a few instances when you must reset your alarms in Phoenix. If you use a smart command panel, your system reset normally takes one or two button tap following a false alarm, power outage, or battery change.

Check Your Owner’s Manual Before Attempting An Alarm Reset

A word to the wise before you try to reset your Phoenix home security system, consult your owner’s manual first. You wouldn’t want to damage your system because you hit the wrong button. In addition, control panels may have changed if you switched from a numerical keypad to a modernized touchscreen interface. Keep in mind that if you can't reset your system, don't worry as you can always reach out to your trusted security specialists.

Resetting Your Phoenix Security System Because Of A False Alarm

Usually, a false alarm occurs as a result of an accidentally tripped sensor. You are able to use the ADT Command touchscreen or open your ADT smartphone app and touch the shield icon and type in your security code to switch off the system when this occurs. You may get a call from your 24-hour monitoring specialists, but just let them know you had a false alarm.

Tips To Reset Your Alarm When Experiencing A Power Outage In Phoenix

If power is lost because of lighting, strong winds, or other reasons, you may begin hearing a repeated, high-pitched beep from your central command hub. This lets you know that your home’s defense is using the battery backup. To reset your equipment and silence the steady beeps, you need to take steps to disarm and rearm your security.

However, if your power outage lasts for prolonged time frame, you might need a complete reset of your home’s security. Follow the instructions in the manual -- usually by entering your unique passcode and pressing the on/off button twice -- and you should be back in business. You might keep hearing chirps from the backup power, as it’s possible it won’t cease until the battery charges entirely. Contact your home security agent if you keep having problems with your ADT controls at least 20 hours after your power is back on.

How To Reset Your Home Security System After Changing A Battery

On occasion you need to replace a battery within one of your home security components. In order to accomplish this, you should switch your alarm system to Test Mode so you prevent setting off a false alarm. When the battery is replaced, change the alarm panel from test mode and resume normal operations. If the command center is unable to recognize the component or the battery icon is still on, you could have to perform a full reset of your security system.

Resetting Your Phoenix Security System After Adding Or Deleting A User

Adding and deleting people can be done on the ADT Command panel and your ADT smartphone app. You should never need a resetting of your system following the addition or deletion of a user or code. But you should note, if you move into a new property that already has an ADT system, you should call your home security professional at (602) 649-6096 to start a new plan. The technician will go on site to switch out outdated parts, place other components (if needed), and reset the system for you.

A Well-Designed Security System Can Be Yours Today

Attempting to reset a home security system in Phoenix will likely be a challenge if it isn’t equipped with understandable equipment and instructions. If the time has come to find your functional and powerful alarm system, dial (602) 649-6096 or submit the form below. We’ll be pleased to customize the perfect security system for your residence.