ADT® Authorized Dealer Serving the entire Phoenix area
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Phoenix House

Homeowners must defend against numerous risks like burglary, flooding, and fire. But what about a danger that you aren’t able to see or smell? Carbon monoxide poses unique challenges because you might never be aware that it’s there. Despite that, implementing CO detectors can easily protect your loved ones and property. Find out more about this dangerous gas and where to place carbon monoxide detectors in your Phoenix property.

What Is Carbon Monoxide?

Known as the silent killer due to its absence of odor, color, and taste, carbon monoxide is a readily found gas formed by the incomplete combustion of fuels. Any appliance that uses fuels like an oven or fireplace can produce carbon monoxide. While you normally won’t have a problem, difficulties can crop up when an appliance is not frequently maintained or appropriately vented. These missteps could result in a build-up of the potentially lethal gas in your home. Generators and heaters of various types are the most common reasons for CO poisoning.

When exposed to minute concentrations of CO, you may experience fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to high amounts may lead to cardiopulmonary arrest, coma, and death.

Suggestions For Where To Place Phoenix Carbon Monoxide Detectors

If you don’t use at least one carbon monoxide detector in your residence, buy one today. Preferably, you ought to use one on every floor, and that includes basements. Here are a few suggestions on where to place carbon monoxide detectors in Phoenix:

  • Put them on each floor, particularly in areas where you utilize fuel-burning appliances, such as water heaters, furnaces, gas dryers, and fireplaces.
  • Always have one within 10 feet of bedrooms. If you only have one CO detector, this is the place for it.
  • Position them about 10 to 20 feet away from potential CO sources.
  • Avoid installing them immediately next to or above fuel-burning appliances, as a small degree of carbon monoxide may be released when they kick on and set off a false alarm.
  • Attach them to walls about five feet from the floor so they will measure air where people are breathing it.
  • Avoid installing them in dead-air places and next to doors or windows.
  • Put one in areas above attached garages.

Check your CO detectors often and maintain them per manufacturer guidelines. You will generally have to replace them within five or six years. You should also make certain any fuel-burning appliances are in in good working order and sufficiently vented.